Align T-REX 500 PRO DFC Super Combo

Align T-REX 500 PRO DFC Super Combo
Align T-REX 500 PRO DFC Super Combo Align T-REX 500 PRO DFC Super Combo Align T-REX 500 PRO DFC Super Combo Align T-REX 500 PRO DFC Super Combo Align T-REX 500 PRO DFC Super Combo Align T-REX 500 PRO DFC Super Combo Align T-REX 500 PRO DFC Super Combo
Brand: Align
Product Code: RH50E01XW
Availability: In Stock
Price: от 699.99 $ до 639.99 $
Add to Wish List
Add to Compare
 цена — 699.99 $
Following the design and manufacturing excellence of Align, T-Rex 500E PRO DFC is a new generation of 500 class helicopter with exclusive innovations.

Equipped with the trend setting, low CG DFC rotor head, providing the most direct and precise control feel back to the pilot. Composite technology is used throughout the side frames which cleverly strengthen the weak areas, and eliminated servo mounting nuts to simplify maintenance at the same time. Removable gyro mounting platform and receiver mount are more rigid and ergonomically friendly. Rudder servo is mounted inside the frame for more central CG point to improve 3D performance, as well as minimize crash damage to the servo. At the heart of the helicopter, the high efficiency Align MX series motor provide continuous power.

T-Rex 500E Pro DFC features high stability, excellent gust resistance, superior control feel, and being 500 is just the right size/price, it is the ultimate choice for enthusiasts.

Focus Shots


Previous
Next

Previous
Next



Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed,New 500DFC CCPM Metal Swashplate and metal main shaft bearing block.


Newly designed electronic equipments and ESC mount.



Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation.


Uses high precision slant tooth (helical) main gear, with higher load sustainability and lower noise output.



Newly Metal Anti Rotation Bracket.


Newly designed Gyro and Receiver mount.



Brand new carbon tail control pushrod assembly.


High efficiency shaft tail drive system,High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly.


Standard equipment

●3GX Flybarless System X 1 set
●RCE-BL70G Brushless ESC X 1
●500MX Brushless Motor(1600KV) X 1
●DS515M Digital servo X 3
●DS525M Digital servo X 1
Specification

● Length: 868mm
● Height: 275mm
● Main Blade Length: 425mm
● Main Rotor Diameter: 978mm
● Tail Rotor Diameter: 206mm
● Motor Drive Gear:12T
● Main Drive Gear:134T
● Autorotation Tail Drive Gear: 145T
● Tail Drive Gear: 36T
● Drive Gear Ratio: 1:11.17:4.03
● Weight(With Motor): 1210g
Accessories

●T-REX 500PRO DFC Kits Set X1
●3GX Flybarless System X1 set
●425 3G Carbon fiber blades X1
●500MX Brushless Motor(1600KV) X1
●DS515M Digital servo X3
●DS525M Digital servo X1
●RCE-BL70G Brushless ESC X1


Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
●Digital Pitch Gauge

3GX Programmable Flybarless System


●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
●3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
●Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates....[+] More
3GX Programmable Flybarless System

●Operating voltage range:DC 3.5V~8.4V
●Operating current consumption:<80mA @4.8V
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Sensor resolution:12bit
●Supports 90/120/135/140 CCPM swashplates
●Spektrum and JR Satellite antennas support (Replaces original factory receiver)
●Futaba S.BUS system support
●Supports Wide/Narrow Bandwidth Digital and brushless servos
●Compatible with 2 to 5 blades rotor heads



●Built in governor function
●Maximum working voltage:8.5V
●Compatible with 1024/2048 resolution Spektrum receivers
●Field setup without the use of a PC
●Support up to 6 servos
●Automatic servo type recognization
●Operating Temperature:-20~60 degree
●Operating Humidity:0%~95%
●Size:36.5x25.2x15.6 mm Size
●Weight:11g


FBL system
Align 3GX Flybarless System
Motor
Align 500MX
ESC
Align RCE-BL70G
Cyclic servo
Align DS515M
Tail servo
Align DS525M
Main blades
Align 425mm Carbon blades
Tail blades
Included
Transmitter
Not included
Indoor/Outdoor
Outdoor
Channel quantity
6
Rotorhead control
Collective Pith
FBL/Flybarless
Flybarless
RC heli class
400
Main Rotor Diameter
978
Tail Rotor Diameter
206
Max.blade length
425
Tail drive type
Torque Tube
Battery
Not included
BEC
Built In ESC
Charger
Not included
Height
275
Kits type
Super Combo kit
Type of power plant
Electrical
Max Lipo Cell
6
Length
868
There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Catalog RC © 2018